Filter
Top Products
10
Pipe O.D. 58.0
Wall thick 4.0
Lining 0.0
Wall MILD STEEL
Lining ---------
Fluid WATER
Read flow
Exit
Note
:
•
Site Zero is always the
QUICK START
data and cannot be changed.
•
Changing the data in any site is automatically saved when leaving this menu. Data will have to be re-entered to
over ride the old data.
List Sites
Selecting
LIST SITES
allows the user to view the names of up to 20 sites, numbers 1-5 appear first.
Pressing ENTER will display sites from 6-10. Pressing again will display sites 11-15, and again to display 15-20.
1 site not named
2 site not named
3 site not named
4 site not named
5 site not named
Press ENTER to continue
Site Number
Site number
allows the user to enter the number of the site data that you wish to be displayed. If the site has not been
used then no data would be stored. You can now enter new application data.
Site Name
Site name
allows the user to edit or enter a site name. Use the scroll keys to move the cursor to the letter/figure
required and press ENTER to select. Press zero, to return the instrument to
VIEW/EDIT SITE DATA
.
The new site
name will appear on the display.
SCROLL & ENTER select
for space, 0 to end
abcdefghijklmnopqr
stuvwxyz01234567890
>……...............<
Dimension Units
Dimension units
allow the user to switch between millimetres and inches. The electronics converts all the application
data in a particular site.
Pipe wall/lining thickness
and
Pipe wall/lining material
can now be changed as required. Lining material is ignored if
a lining thickness has not been entered. A selection of pipe wall/lining materials will be displayed when these options
are selected.
Fluid type
Fluid type
allows the user to scroll through a selection of fluid types. Select
OTHER
in the
menu if a liquid is not
mentioned.
Select fluid type
. When
Other (m/s)
is selected the user must enter the liquid sound speed in m/s. This can be supplied
by Micronics or found in the back of the manual under
Liquid Sound Speeds
.