Filter
Top Products
23
Figure 15
:-
PORTAFLOW 216 Flow Range
PORTAFLOW 216 FLOW RANGE - DIAGONAL MODE
PORTAFLOW 216 FLOW RANGE – REFLEX MODE
WARRANTY
The material and workmanship of the PORTAFLOW 216 is guaranteed by MICRONICS LTD for one year from the
date of purchase provided the equipment has been used for the purpose for which it has been designed, and operated in
accordance with the operating manual supplied.
Misuse by the purchaser, or any other person, will immediately revoke any warranty given or implied.
Repair or replacement will be at MICRONICS discretion and will be made without charge at MICRONICS plant during
the warranty period. MICRONICS LTD reserve the right, without prior notice, to discontinue manufacture, redesign or
modify any of its products. Your statutory rights are not affected by this warranty.
If any problems develop, customers are requested to take the following steps:
Notify MICRONICS LTD or the Distributor/Agent from whom the flowmeter was purchased giving details of the
problem. Be sure to include the Model & Serial Number of the instrument. When returning the product to the factory,
carefully package and ship freight prepaid. Be sure to include a complete description of the application and problem
and identify any hazardous material used with the product. The Warranty of the PORTAFLOW is strictly in
accordance with that stated above, and cannot in any way be extended.
CE MARKING
The PORTAFLOW 216 has been tested and found to conform to EN50081 - 1 Emission Standards and EN50082 - 1
Immunity Standards. The tests were conducted by AQL - EMC Ltd, of 16 Cobham Road, Ferndown Industrial Estate,
Wimborne, U.K. BH21 7PG. The unit was tested with all cables as supplied of a maximum length of 3m. While the
operation of the unit may not be affected by the use of longer cables, MICRONICS can make no statement about
conformance to the above standards when these cables are in use.
The PORTAFLOW 216 is supplied with an external battery charging unit. This unit is manufactured by Frieman &
Wolf, Geratebau GmbH. P.O. Box 1164 D-48342 Ostbevan, Germany who have CE marked the equipment.
MICRONICS have purchased this equipment on the understanding that the manufacturers have tested the unit to the
relevant standards prior to CE marking the product. MICRONICS have not tested the charger unit and cannot accept
responsibility for any non conformance from the relevant standards.
200
150
100
75
50
25
13
0
0.07 0.10 0.13 0.22 0.29 0.32 0.42 5.9 8.2 11.40 14.76 23.94 30.90 fps
0.02 0.03 0.04 0.07 0.09 0.10 0.13 1.8 2.5 3.5 4.5 7.3 9.4 mps