Filter
Top Products
7
The instrument now asks for the
Pipe outside diameter?
After entering the outside diameter in millimeters press
ENTER
.
QUICK START
Dimension units mm
Pipe O.D.? 58.0
Pipe wall thickness
now appears on the display. Enter the pipe wall thickness in millimeters, then press
ENTER.
QUICK START
Dimension units MILLIMETRES
Pipe O.D.? 58.0
Wall thick? 4.0
Pipe lining thickness
now appears on the display. If the pipe you are measuring has a lining, enter the
Pipe lining
thickness
.
If nothing is entered the instrument automatically assumes there is no lining. Press ENTER to move onr after
entering the data.
QUICK START
Dimension units MILLIMETRES
Pipe outside diameter? 58.0
Wall thick? 4.0
Lining? 0.0
The instrument now displays
Select pipe wall material
. Using the scroll keys it is possible to scroll up or down the
options available. Select the required material and press
ENTER.
QUICK START
Select pipe wall material:
Mild Steel
S’ less Steel 316
S’ less Steel 303
Plastic
Cast Iron
Ductile Iron
Copper
Brass
Concrete
Glass
Other (m/s)
T
he following will only be displayed at this stage if a lining thickness has been entered. Use the scroll keys to select the
required material, then press
ENTER
. If
Other
is selected, enter the sound speed of the lining in metres/sec.