Filter
Top Products
Moisture Condensation
Self Diagnosis Display
✤ Before contacting a Samsung authorized service centre, perform
the following simple checks.
They may save you the time and expense of an unnecessary call.
✤ If the Camcorder is brought directly from a cold place to a warm
place, moisture may condense inside the Camcorder, on the
surface of the tape, or on the lens.In this condition, the tape may
stick to the drum head and be damaged or the unit may not
operate correctly.
The Camcorder is fitted with a moisture sensor to resist damage
under these circumstances.
✤ If there is moisture inside the Camcorder, (DEW) is displayed.
If this happens, none of the functions except cassette ejection will
work.Open the cassette compartment and remove the battery.
Leave the Camcorder in a dry, warm room for at least two hours.
slow
slow
no
slow
slow
slow
slow
the Battery pack is almost discharged. Change to a charged one.
When the remaining time on the tape
is about 2 minutes.
Prepare a new one.
the tape reached its end.
Change to a new one.
there is no tape in Camcorder.
Insert a tape.
the tape is protected from recording.
If you want to record, release
the protection.
moisture condensation has formed in
the Camcorder.
see below.
the Camcorder has some mechanical
fault.
1.Eject the tape.
2.Set to OFF.
3.Detach the battery.
4.Reattach the battery.
* If unresolved contact your local
Samsung service centre.
Tape end !
Tape end !
No Tape !
Protection !
....D
L
C
R
Display
Blinking Informs that... Action
Troubleshooting
Troubleshooting
ENGLISH
114114
✤
✤
✤
2 2
1
2 OFF
3
4
*
Tape end !
Tape end !
No Tape !
Protection !
....D
L
C
R