Filter
Top Products
Playback
✤ The Audio Dubbing function works only in Player Mode.
✤ You cannot dub sound on a pre-recorded tape in LP or 16 bit mode.
✤ You can add sound to the original sound on a pre-recorded tape
recorded in SP mode with 12bit sound.
✤ Use the internal or an external microphone (not supplied) or other audio
equipment.
✤ The original sound will not be erased.
1. Set the Power switch to PLAYER.
■ If you want to use an external
microphone, connect the microphone to
the external MIC input jack on the
Camcorder.
2. Set the Mode switch to TAPE.
■ When you wish to dub using the
External A/V input, connect the Multi-AV
cable to the Multi-AV jack at the front
side of camcorder.(see to page 75)
3. Press the (PLAY/STILL) button and find
the time frame of the scene to be dubbed.
4. Press the (PLAY/STILL) button to
pause the scene.
5. Press the A.DUB button on the remote
control.
■ Audio dubbing ( ) icon will be
displayed.
■ The Camcorder is ready for dubbing.
6. Press the (PLAY/STILL) button to start dubbing.
7. Press the (STOP) button to stop the dubbing.
[ Notes ]
■ You cannot use the Audio dubbing function while playing a write
protected video tape.
■ To utilize an external MIC or sound source, connect a microphone to
the MIC jack or use the Multi-AV cable to connect to external sound
source input.
■ To dub an external sound source, set the AV In/Out function to AV In.
(VP-D453i/D454i/D455i only) (see page 75).
Dubbing Sound
Audio Dubbing (VP-D453(i)/D454(i)/D455(i) only)
ENGLISH
7676
✤ Audio Dubbing
✤ LP 16bit
✤ 12
SP
✤
✤
1. PLAYER
■
2. TAPE
■ A/V
-AV
75
3. PLAY/STILL /
4. PLAY/STILL /
5. A.DUB
■
■
6. PLAY/STILL /
7. STOP
■
■ AV
■ AV In/Out AV / In
( VP-D453i/D454i/D455i) 75
( VP-D453(i)/D454(i)/D455(i))
√
1
3 4 5