Filter
Top Products
Basic Recording
✤ The EASY.Q mode works only in Camera mode.
✤ The EASY.Q mode allows a beginner to easily make good
recordings.
1. Set the Power switch to CAMERA.
2. Set the Mode switch to TAPE.
(VP-D453(i)/D454(i)/D455(i) only)
3. By pressing the EASY.Q button, all functions on the
camera will be set to off and the recording settings
will be set to the following basic modes:
■ The word EASY.Q will appear on the LCD
screen at the same time.
■ Battery level, recording mode, counter,
date/time, and DIS ( ) will be displayed.
However, the Date/Time will only be seen if it
has been previously set.(see page 33)
4. Press the Start/Stop button to start recording.
Recording will begin using the basic automatic
settings.
5. Press the EASY.Q button again in the STBY mode
and then turn the EASY.Q mode off.
■ The EASY.Q function will not turn off while you
are recording.
■ The camera will return to the settings that were
set prior to activating EASY.Q mode.
[ Notes ]
■ In EASY.Q mode, certain functions are not
available, such as Menu, BLC and Manual focus.
If you want to use these functions, you must first
turn the EASY.Q mode off.
■ The EASY.Q mode settings are deleted when the Battery pack is
removed from the Camcorder and must be reset when the Battery
pack is replaced.
■ Taking a photo image using the PHOTO button while EASY.Q is
set, releases DIS function.
■ Digital Zoom, Color Nite or Digital Effect is not available in the
EASY.Q mode.
Using EASY.Q Mode (for Beginners)
✤ Camera EASY.Q
✤ EASY.Q
1. CAMERA
2. TAPE
( VP-D453(i)/D454(i)/D455(i))
3. EASY.Q
■ EASY.Q
■
/ DIS
Date/Time /
Date/Time / 33
4. Start/Stop /
5. STBY EASY.Q
EASY.Q
■ EASY.Q
■ EASY.Q
■ EASY.Q
Menu BLC Manual focus
EASY.Q
■ EASY.Q
■ EASY.Q PHOTO
DIS
■ EASY.Q
EASY.Q
4040
ENGLISH
60min
0:00:10
SP
STBY
3
1
œ