Filter
Top Products
IEEE1394 Data Transfer
■ Connecting to other DV standard products.
A standard DV connection is quite simple.
If a product has a DV jack, you can transfer data by connecting to
the DV jack using the correct cable.
NOTE: Please be careful since there are two types of DV ports,
(4pin, 6pin).This Camcorder has a 4pin terminal.
■ With a digital connection, video and audio signals are transmitted
in digital format, allowing high quality images to be transferred.
■ If you want to transmit data to a PC, you must install an IEEE1394
add-on card into the PC.(not supplied)
■ The frame rate for video capture is dependent on the capacity of
the PC.
[ Notes ]
■ When you transmit data from the Camcorder to another DV device,
some functions may not work.
If this occurs, please reconnect the DV cable or turn the power
OFF and ON again.
■ You cannot transmt data from the Camcorder to PC in M.Player
mode.(VP-D453(i)/D454(i)/D455(i) only)
■ Do not use the Camcorder and IEEE1394 together as this will
cause IEEE1394 to shut off.
■ Do not connect the Camcorder to a PC using both DV and USB
cables.It may not operate properly.
■ Operation is not guaranteed for all computer environments
recommended above.
■ The IEEE1394 cable (DV cable)is sold separately.
■ Video Capture software is commercially available.
■ Most DV enabled PCs have a 6 pin socket.In this case, a 6pin/4pin
cable is required for the connection.
■ Most DV enabled Notebooks and Laptops have a 4 pin socket.
Use a 4pin/4pin cable for the connection.
■ DIS and Color Nite are not available in DV (IEEE1394) mode.
Connecting to a PC
Connecting to a DV Device (DVD Recorder,Camcorder,etc.)
Transferring IEEE1394 (i.LINK)-DV standard data connections
ENGLISH
7878
IEEE1394
■ DV
DV
DV
DV
: DV 4 6
4
■
■ PC PC IEEE1394
■ PC
■ DV
DV
■ M.Player
PC ( VP-D453(i)/D454(i)/D455(i))
■ IEEE1394 IEEE1394
■ DV USB
■
■ IEEE1394
■
■ DV PC 6
6 /4
■ DV 4
4 /4
■ DV IEEE1394 DIS
Color Nite
PC
DV DVD
IEEE1394 i.LINK - DV