Filter
Top Products
Playback
✤ You can connect your Camcorder to a TV through a VCR.
1. Connect the Camcorder to your VCR with
the Multi-AV cable.
■ The yellow jack:Video
■ The white jack:Audio(L) - Mono
■ The red jack:Audio(R)
2. Connect a TV to the VCR.
3. Set the Power switch to PLAYER.
4. Set the Mode switch to TAPE.
(VP-D453(i)/D454(i)/D455(i) only)
5. Turn on both the TV and VCR.
■ Set the input selector on the VCR to
Line.
■ Select the channel reserved for your VCR on the TV set.
6. Play the tape.
✤ You can play the recorded tape in Player mode.
1. Connect a power source and set the Power switch
to PLAYER.
2. Set the Mode switch to TAPE.
(VP-D453(i)/D454(i)/D455(i) only)
3. Insert the tape you wish to play back.
4. Using the / (REW/FF) buttons, find the first
position you wish to play back.
5. Press the (PLAY/STILL) button.
■ The images you recorded will appear on the TV after a few
seconds.
■ If a tape reaches its end while being played back, the tape will
rewind automatically.
[ Notes ]
■ The playback mode (SP/LP) is determined by the mode in which
the tape was recorded.
■ If the VCR has an S-Video input terminal, you may use S-Video
Connector for better quality.
■ The S-Video Connector transmits video only. Connect Audio cables
for sound.
■ If only a mono audio input is available on the TV set, use the audio
cable with the white jack (Audio L).
Connecting to a TV which has no Audio and Video Input Jacks
Playback
ENGLISH
7171
✤
1.
■ Video
■ Audio L [ ]-
■ Audio R [ ]
2.
3. PLAYER
4. TAPE
( VP-D453(i)/D454(i)/D455(i))
5.
■ Line
■
6.
✤ Player
1. PLAYER
2. TAPE
( VP-D453(i)/D454(i)/D455(i))
3.
4. / REW/FF /
5. PLAY/STILL /
■
■
■ SP/LP /
■
S-Video S-Video
■ S-Video
■
Audio L
DV
USB
AV/ S
Antenna
S-Video input
TV
VCR
Camcorder
Video input-Yellow
Audio input(left)-White
Audio input(right)-Red
Audio/Video/
S-Video