Filter
Top Products
Preparation
Adjusting the Hand Strap
It is very important to ensure that the Hand strap has been correctly
adjusted before you begin your recording.
The Hand strap enables you to:
- Hold the Camcorder in a stable, comfortable position.
- Press the ZOOM and Start/Stop button without having to change the
position of your hand.
1. Insert the Hand strap into the
Hand strap hook on the front
side of the Camcorder and
pull its end through the hook.
2. Insert your hand into the hand
strap and adjust its length for
your convenience.
3. Close the Hand strap.
1. Pull and open the Hand strap
cover to release the Hand
strap.
2. Remove it from the ring and
adjust its length.
3. Put your hand through the
Hand Strap and close the
cover of Hand Strap.
1. Hook up the Lens cover with
the Lens cover strap as
illustrated.
2. Hook up the Lens cover
strap to the Hand strap, and
adjust it following the steps
as described for the Hand
strap.
3. Close the Hand strap.
Hand Strap
When You carry Your
Camcorder
Attaching the Lens Cover
ENGLISH
1818
-
- ZOOM Start/Stop
/
1.
2.
3.
1.
2.
3.
1.
2.
3.
1 2 3
1 2 3
1 2 3