Filter
Top Products
Basic Recording
✤ The Self Timer function works only in Camera mode.
✤ When you use the Self Timer function on the remote control, the
recording begins automatically in 10 seconds.
1. Set the Power switch to CAMERA.
2. Set the Mode switch to TAPE.
3. Press the SELF TIMER button until the appropriate
indicator is displayed in the LCD screen.
4. Press the Start/Stop button to start the timer.
- Self Timer starts counting down from 10 with a
beep sound.
- In the last one second of the countdown, the
beep sound gets faster, then recording starts
automatically.
- If you want to cancel the Self Timer function
before recording, press the SELF TIMER
button.
5. Press the Start/Stop button again when you wish
to stop recording.
[ Notes ]
■ Do not obstruct the remote control sensor by
putting obstacles between the remote control and
Camcorder.
■ The remote control range is 4 ~ 5m (13 ~ 17 ft).
■ The effective remote control angle is up to 30 degrees left /right
from the centre line.
■ Using a tripod is recommended for delayed recording.
Self Record using the Remote Control
(VP-D453(i)/D454(i)/D455(i) only)
ENGLISH
4343
✤ Camera Self Timer
✤ Self Timer 10
1. CAMERA
2. TAPE
3. SELF TIMER
4. Start/Stop /
- 10
-
- Self Timer
SELF TIMER
5. Start/Stop /
■
■ 4 5m 13 17
■
■
( VP-D453(i)/D454(i)/D455(i))
œ
1
3
4
œ