Filter
Top Products
Playback
✤ The Speaker works only in Player mode.
✤ When you use the LCD screen for playback, you will hear recorded
sound from the built-in Speaker.
- Take the following steps to lower the volume or mute the sound
while playing a tape on the Camcorder.
1. Set the Power switch to PLAYER.
2. Set the Mode switch to TAPE.
(VP-D453(i)/D454(i)/D455(i) only)
3. Press the (PLAY/STILL) to play the tape.
4. Use the Menu selector to adjust the volume.
■ A volume level display will appear on the LCD
screen.
Levels may be adjusted from anywhere between
00 to 19.You will not hear any sound when the
volume is set on 00.
■ If you close the LCD screen while playing, you
will not hear sound from the speaker.
[ Notes ]
■ When the AV cable is connected to the Camcorder,
you will not hear sound from the Built-In Speaker
and cannot adjust the volume.
■ The sound will return when you remove the
connected AV cable from the jack of your
Camcorder.
Controlling Sound from the Speaker
ENGLISH
6969
✤ Player
✤
-
1. PLAYER
2. TAPE
( VP-D453(i)/D454(i)/D455(i))
3.
(PLAY/STILL /
4. Menu selector
■
00 19 00
■
■ AV
■ AV
60min
0:46:00:11
†
…
SP
√
[05]
3
4