Filter
Top Products
2.2. Set-up
The ar range ment of the hop per load ers may vary de pend ing on the type of de -
vice to be con veyed on and the ma te rial used. Fas ten ing onto fixed ma chine
throats is pro vided by means of strap re tain ers. How ever, ad di tional sup port of
the hop per loader is nec es sary if the de vices are not suf fi ciently ca pa ble of bear -
ing the load.
Mount the hop per loader in such a way that the out let flap swings in a right-hand
an gle to the di rec tion of ma chine move ment. Please check dur ing as sem bly that
the ad mis si ble bear ing loads are not ex ceeded.
Please check that all con nect ing points are tight to en sure that the con vey ing per -
for mance is not im paired.
It should more over be ob served, par tic u larly if cus tom pro duced con nect ing parts
are used, that the ma te rial dis charged from the hop per loader must nei ther get
into the open nor must it clog the fil ter sur faces (ob serve an gle of re pose!).
F
Do not ex ces sively load in let noz zle of hop per loader,
re move hose sep a rately, if nec es sary!
526-3MS
SSP 5
In stal la tion in struc tions 12
J
L
Assembly