Filter
Top Products
Re moval
Open the ten sion ring (A).
Re move the hop per loader lid.
Re move the clean ing unit.
Re lease clamp ing de vices of the fil ter car -
tridges.
Re move the fil ter car tridges from the in ter -
me di ate plat form.
Clean the fil ter car tridges from the in side
out by means of com pressed air or re -
place the fil ter car tridges by new ones.
In stal la tion
In sert fil ter car tridges into the open ing of
the in ter me di ate plat form.
F
Make sure that the seal ing pad is tightly fit ted be tween fil ter
car tridges and in ter me di ate plat form.
Mount clamp ing de vices of the fil ter car tridges.
Mount the clean ing unit.
Mount the hop per loader lid.
Mount the ten sion ring.
&
Or der num ber
fil ter car tridge, short ver sion: ID 83379
526-3MS
SSP 5
Main te nance 29
SSP 5