Filter
Top Products
5. Main te nance
»
This chap ter is in tended for per sons with skills in elec tri cal and
me chan i cal ar eas due to their train ing, ex pe ri ence and re ceived
in struc tions.
Per son nel us ing the in struc tions in this chap ter must be in -
structed of the reg u la tions for the pre ven tion of ac ci dents, the
op er at ing con di tions and safety reg u la tions and their im ple men -
ta tion.
En sure in each case that the per son nel are in formed ac cord -
ingly.
For main te nance work tak ing place at heights of over
approx.1829 mm (6 ft.), use only lad ders or sim i lar equip ment
and work ing plat forms in tended for this pur pose. At greater
heights, the proper equip ment for pro tec tion against fall ing
must be worn.
Use only suit able lift ing gear which is in proper work ing or der
and load sus pen sion de vices with suf fi cient car ry ing ca pac ity.
Do not stand or work un der sus pended loads!
En sure that the elec tric mo tors/switch cab i nets are suf fi ciently
pro tected against mois ture.
Use only suit able work shop equip ment.
Be fore start ing main te nance work, ap point a su per vi sor.
In form the re spon si ble per son nel be fore main te nance work on
the sys tem is started.
Never op er ate the equip ment when par tially dis man tled.
All main te nance and re pair work not de scribed in this chap ter
may only be car ried out by Ster ling ser vice per son nel or au tho -
rized per son nel (ap pointed by Ster ling ).
526-3MS
SSP 5
Main te nance 21