Filter
Top Products
4.1. Set ting the con trol ler SSP
&
It is only pos si ble to set the pulse du ra tion / time in ter val
when the unit is not con vey ing any ma te rial.
Set ting the pulse du ra tion
Press the “ar row key”.
&
The pulse du ra tion (= du ra tion of a clean ing pulse) which
was last se lected ap pears in the dis play.
0.5, 1.0 or 1.5 sec onds may be set for the pulse du ra tion.
Set ting the time in ter val
Press the “ar row key” and
the “change-over” key.
&
The time in ter val which was last se lected ap pears in the dis -
play.
5-20 sec onds may be set for the time in ter val be tween 2
clean ing pulses.
526-3MS
SSP 5
Putting into op er a tion 19