Filter
Top Products
Chapter 5: Advanced Serverboard Setup
5-25
5-10 Onboard Indicators
LAN LEDs
The Ethernet ports (located beside the
VGA port) have two LEDs. On each
Gigabit LAN port, one LED indicates
activity when blinking while the other
LED may be green, amber or off to
indicate the speed of the connection.
See the table on the right for the func-
tions associated with the connection
speed LED.
LAN LED
Connection Speed Indicator
LED Color Defi nition
Off No connection or 10 Mb/s
Green 100 Mb/s
Amber 1 Gb/s
LE1
An Onboard Power LED is located at
LE1 on the serverboard. When this
LED is lit the system is on. Be sure
to turn off the system and unplug the
power cord before removing or install-
ing components. See the table at right
for more information.
Onboard PWR LED Indicator
LED Color Defi nition
Off System Off/Power cable
not connected
Green System On
Dedicated IPMI LAN LEDs
In addition to LAN1 and LAN2, a dedi-
cated IPMI LAN is located on the I/O
backpanel. The amber LED indicates
activity, while the Link LED indicates
the speed of the connection. See the
tables at right for more information.
Activity LED
Activity LED
Link LED
Link LED
IPMI LAN Indicator
LED Color Defi nition
Off No Connection or 10
Mb/s
Green 100 Mb/s
IPMI LAN Activity Indicator
Color Status Defi -
nition
Amber Flashing Active
UID LED
The rear UID LED is located at the
I/O backplane. This LED is used in
conjunction with the rear UID switch to
provide easy identifi cation of a system
that might be in need of service.
UID LED
Color/State OS Status
Blue: On Windows Unit Identifi ed
Blue:
Blinking
Linux Unit Identifi ed