Filter
Top Products
6-4
SUPERSERVER 6016T-6RFT+/6016T-6RF+ User's Manual
Figure 6-2. System Cooling Fans
Accessing the Drive Bays
Hard Drives: Because of their hotswap capability, you do not need to access the
inside of the chassis or power down the system to install or replace the SAS/SATA
drives. Proceed to the next section for instructions.
DVD-ROM Drive: For installing/removing a DVD-ROM drive, you will need to gain
access to the inside of the 6016T-6RFT+/6016T-6RF+ by removing the top cover
of the chassis. Proceed to the "DVD-ROM Drive Installation" section later in this
chapter for instructions.
Note: Only a "slim" DVD-ROM drive will fi t into the 6016T-6RFT+/6016T-6RF+.
Warning: Enterprise level hard disk drives are recommended for use in Supermicro
chassis and servers. For information on recommended HDDs, visit the Supermicro
Web site at http://www.supermicro.com/products/nfo/storage.cfm