Filter
Top Products
6-2
www.topconpa.com
Weather Station Operation/Installation Manual
Mounting the Topcon Weather Station
Find a suitable at surface on the vehicle’s cabin1.
If attaching the Marine Mount (B125) to a plastic or bre-glass 2.
surface, then attach a metal plate, no smaller than 12”x 12”
(300mm x 300mm) to the plastic or bre-glass surface. Then
attach the Marine Mount to the metal plate
Fix the 3. Marine Mount (B125) to the at metal surface using
the 4 screws (F374), 4 at washers (F200) and 4 nyloc nuts
(F372) which are provided in the kit (Figure 5-3 on page 5-3)
Do not mount the Weather Station near any heat
producing objects, like exhaust pipes.
WARNING
When installing the Marine Mount, ensure that the
handle is in a convenient position to fold away the
Weather Station.
TIP
Ensure that when the Marine Mount is folded, it is not
obstructed by other equipment such as antennae or
rotating beacons etc.
TIP
Place the Dash Warning sticker (Figure 5-1 on page
5-1) in the operator of the vehicle’s line of vision, to
remind the operator of high mounted objects on the
vehicles roof.
TIP