Filter
Top Products
6-5
A3280 Rev 1.2
Weather Station Operation/Installation Manual
The 19. A1953 (Figure 5-1 on page 5-1) may be required if the X20
console’s switched power connector is already used. This
provides 12 Volts to the Weather Station when the X20 console
is switched ON
Use the 20. cable ties (Y216) provided, to keep the harness out of
the way. Do not cable tie the A3372 harness too tightly
Make sure the Weather Station Dash Label (W156) is on the 21.
dashboard of the vehicle the Weather Station is attached to
(in the operator’s line of vision), to alert the operator that the
Weather Station is mounted on the vehicle’s roof.
This completes the hardware installation of the Weather Station.