Filter
Top Products
9-3
A3280 Rev 1.2
Weather Station Operation/Installation Manual
Units
The units displayed for wind speed and temperature are determined
by the units selected in the Guidance>General Setup/>Units
window (page 4-12 of the X20 Guidance Manual).
• If Imperial units is selected then Fahrenheit will be used for
temperature and ‘miles per hour’ (mph) will be used for wind
speed
• If Metric units is selected then Celsius, will be used for
temperature and ‘kilometres per hour’ (km/h) will be used for
wind speed.
Warning alarms points can be set for the following:
• High Delta T
• Low Delta T
• High wind speed (High Wind:)
• High temperature (High Temp:)
Setting the Weather Station Warning Alarm Points
In the 1. Warnings window on the Weather Station Setup
dialog box (Figure 9-2 on page 9-1) press the button next to
the warning alarm that requires changing
Using the 2. calculator screen, type in the new alarm point
value using the buttons
Press the 3. Enter button