Filter
Top Products
9-2
www.topconpa.com
Weather Station Operation/Installation Manual
Enabling the Weather Station
On the 1. Weather Station Setup dialog box (Figure 9-2 on page
9-1) select the Weather Stn Enabled option, to enable the
Weather Station. To enable the Weather Stn option press the
white box (so that a black tick appears in it).
Enabling the Weather Station option allows the Weather Station
data:
• To display wind speed, temperature, humidity and Delta T on
the Guidance status bar
• To display the wind direction on the Guidance Compass
watermark
• To be recorded every minute in the Guidance GDX le, so the
data can be displayed in GDX Viewer at a later stage
Enabling the Weather Station Warnings
When the Weather Station warnings are enabled, audible warnings will
be sounded when a warning condition has been reached.
To enable the Weather Station warnings select the Warnings Enabled
option on the Weather Station Setup dialog box (Figure 9-2 on page
9-1), by pressing the white box (so that a black tick appears in it).
When the Weather Station Enabled option has been selected, then the
warnings will be sounded when the alarm points have been reached, as
displayed in the Warnings window (Figure 9-2 on page 9-1).
Select the Weather Stn. Enabled option when the
Weather Station is connected to the X20 console.
NOTICE