Filter
Top Products
User’s Manual 7-5
HW Setup
HDD Priority Options
Set the priority of the HDD as a startup device.
USB Memory BIOS Support Type
Set the type of the USB memory as a startup device.
Network Boot Protocol
This feature sets the protocol to remotely boot from the network.
[PXE]Sets PXE as the protocol (Default).
[RPL]Sets RPL as the protocol.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Standby Mode, you
can turn on the computer by pressing any key. It is effective only for the
internal keyboard and only when the computer is in Standby Mode.
Built-in HDD ->
USB (Default)
The priority is set as built-in HDD -> USB.
USB -> Built-in
HDD
The priority is set as USB memory -> built-in
HDD.
HDD Set the type of the USB memory to be equivalent
to the HDD (Default).
* Based on the HDD order in the Boot Priority
Options item. The order with respect to the other
HDD can be set in the HDD Priority Options
item.
FDD Set the type of the USB memory to be equivalent
to the FDD.
* Based on the FDD order in the Boot Priority
Options item.
Network Boot Protocol is not displayed for Gigabit Ethernet LAN.
Enabled Enables the Wake-up on Keyboard function.
Disabled Disables the Wake-up on Keyboard function (Default).