Filter
Top Products
8-12 User’s Manual
Optional Devices
6. Slip your finger under a notch at the end of the keyboard brace and lift
up to release latches and remove the keyboard brace.
Figure 8-9 Removing the keyboard brace
7. Remove two screws securing the keyboard.
8. Lift up the back of the keyboard, rotate it toward you and lay in face
down on the palm rest.
Figure 8-10 Removing two screws and rotate the keyboard
Keyboard brace
Use a point size 1 Phillips screwdriver.
■ When you move the keyboard forward, do not touch the keys. Doing so
could cause misalignment. Hold the keyboard by the sides and lay it
gently on the palm rest.
■ The keyboard is connected to the computer by a keyboard ribbon
cable. Be careful not to apply tension to this cable when you lift up the
keyboard. Do not try to disconnect this cable.
Screws