Filter
Top Products
Important Safety Instructions
viii 975-0055-01-01
4. To reduce the risk of electrical shock, disconnect DC power from the
inverter before working on any circuits connected to the inverter.
Turning the On/Standby switch to Standby ( ) will not reduce this
risk.
5. Protect the inverter from rain, snow, spray, and water.
6. To reduce the risk of overheating, keep the ventilation openings clear,
and do not install the inverter in a compartment with limited airflow.
Precautions When Working With Batteries
1. To reduce the risk of battery explosion, follow all instructions
published by the battery manufacturer and the manufacturer of the
equipment in which the battery is installed.
2. Make sure the area around the battery is well ventilated.
3. Never smoke or allow a spark or flame near the engine or batteries.
4. Use caution to reduce the risk of dropping a metal tool on the battery.
It could spark or short circuit the battery or other electrical parts and
could cause an explosion.
Explosive Gas Precautions
1. Batteries generate explosive gases during normal operation. Be sure
you follow all relevant instructions exactly before installing or using
your inverter.
2. This equipment contains components which tend to produce arcs or
sparks. To prevent fire or explosion, do not install the inverter in
compartments containing batteries or flammable materials or in
locations that require ignition-protected equipment. This includes any
space containing gasoline-powered machinery, fuel tanks, as well as
joints, fittings, or other connections between components of the fuel
system.
WARNING: Explosion and Fire Hazard