Filter
Top Products
Installation
2–18 975-0055-01-01
Step 8: Connecting Your Equipment to the GFCI Outlets
To connect your AC equipment to the GFCI outlets:
1. Turn the inverter’s On/Standby switch to Standby ( ).
2. Turn your AC equipment off.
3. Connect your AC equipment to the GFCI outlets in the front panel.
4. If you wish to connect more equipment, use a multiple-outlet
extension cord. Ensure that the total power drawn does not exceed
400 watts.
Note: Ensure that the Reset button on the GFCI outlets is not tripped.
Important:
If you have more permanent loads to connect to the
inverter, Xantrex recommends that they be hardwired. See “Step 9:
Hardwiring the AC Output” on page 2–19.