Filter
Top Products
Operation
3–4 975-0055-01-01
If the On/Standby switch on the TS400 is in the On () position and the
optional S400 Remote Switch is in the Standby ( ) position (see
“Important” on page 3–4), the TS400 draws very little current (about
1 mA) from the battery.
Using the Optional S400 Remote Switch
The S400 Remote Switch performs the same function as the On/Standby
switch on the TS400.
Purpose The S400 Remote Switch provides On/Standby control of the TS400 from
a convenient location of up to 25 feet (7.5 meters) away using the
supplied telephone cable.
Cable length You can use a longer cable up to a maximum recommended length of 50
feet (15 meters). Xantrex recommends using a high quality 4-wire
telephone cable wth 6-position, 4-contact connectors.
Important: For the Remote Switch to function, the On/Standby switch
on the TS400 must be turned to the On
() position.
Figure 3-2
S400 Remote Switch
Inverter ON