Filter
Top Products
Introduction
1–4 975-0055-01-01
TS400 Features
Front Panel
\
Figure 1-1
Front Panel of the TS400
Table 1-1
Front Panel Features
)HDWXUH 'HVFULSWLRQ
1
On/Standby Switch turns the inverter to On ( )
or to Standby ().
2 Inverter ON light illuminates when the TS400 is powering
equipment from the battery.
3 Low Battery light illuminates when your battery voltage is lower
than 10.7 volts.
4 Fault light illuminates for fault conditions such as over
temperature, output overload, or battery over voltage.
5 Supplemental Circuit Protection button trips if there is an over-
current (over 7.5 amps) or a short circuit.
6 GFCI outlets for connecting your equipment.
7 Ventilation openings provide air circulation for peak performance.
2
1
3
5
4
6
7