Xantrex Technology TS400 Marine Battery User Manual


 
Installation
24 975-0055-01-01
Materials List
Your TS400 Sine Wave Inverter package includes:
One TS400 Sine Wave Inverter
TS400 Sine Wave Inverter Owners Guide
After you unpack your TS400, be sure to record the product information
in the form Information About Your System on page WA4.
If any of these materials are missing or unsatisfactory, please contact
Customer Service.
Installation Tools and Materials
You will need the following tools and materials to install the TS400 and
the optional S400 Remote Switch:
Tools
To install the TS400, you need:
Phillips screwdriver: #2
Slot screwdrivers: 1/8 inch and 1/4 inch
Wrench for DC terminals: 10 mm or adjustable
Wire stripper
To install the optional S400 Remote Switch, you need:
Power drill with 1/8-inch bit
Jigsaw (optional)
Feed wire (optional)
Materials for TS400 and Optional S400 Remote Switch
To install the TS400 and optional S400 Remote Switch, you require:
DC cables (See Table 2-1 on page 29.)
Telephone 1-800-670-0707 (toll free in North America)
1-604-422-2777 (direct)
Fax 1-604-420-2145
Email CustomerService@xantrex.com
Web www.xantrex.com