A SERVICE OF

logo

ARM DUI 0224F Copyright © 2003-2007 ARM Limited. All rights reserved. 2-1
Chapter 2
Getting Started
This chapter describes how to set up and prepare the PB926EJ-S for use. It contains the
following sections:
Setting up the RealView Platform on page 2-2
Setting the configuration switches on page 2-3
Connecting JTAG debugging equipment on page 2-8
Connecting the Trace Port Analyzer on page 2-10
Supplying power on page 2-13
Using the PB926EJ-S Boot Monitor and platform library on page 2-14.