SKU 94143 For technical questions, please call 1-800-444-3353 PAGE 15
Squeeze the right side of the Trigger (61) to dig. 4. (See Figure H.)
As you dig, push the Auger away from you. This will compensate for the pivoting 5.
action of the machine and keep your hole straight and vertical. (See Figure I.)
Periodically, lift the Bit (65) to clear loose dirt from the hole. This will help to keep 6.
the Auger from binding as well as minimize the dirt being lifted out of the hole.
(See Figure I.)
If the Bit (65) becomes stuck, squeeze the left side of the Trigger (61) to reverse 7.
the rotation of the Auger. (See Figure H.)
When the desired depth of the hole is reached, squeeze the left side of the Trig-8.
ger (61) while raising the Bit (65) completely out of the hole.
Turn the Engine Kill Switch (68) to its 9. “OFF” position to shut off the Engine.
(See Figure H.)
Before Moving The Auger:
HITCH PIN (57)
STORAGE LOCATION
HITCH PIN (57)
MOTOR
PIVOT
BRACKET
(58)
FIGURE J
Lock the Hydraulic Motor (4) in its upright position by inserting one Hitch Pin (57)
into the Motor Pivot Bracket (58). (See Figure J.)
To Tow The Auger:
DANGER! Serious injury or death can occur if the towing precautions and in-
structions on pages 7, 15, and 16 of this manual are not followed:
Remove the Bit (65) from the machine. 1. (See Figure F.)
