SKU 94143 For technical questions, please call 1-800-444-3353 PAGE 2
SPECIFICATIONS
Digging Capacity 8” Diameter x 36” Deep
Hydraulic Pump Type Single Stage
Auger Drive 2,000 PSI / 110 RPM / 3,800 in-lb Torque with Safety Relief Valve
Auger Bit Size 8” Diameter x 36” Long with Safety Shear Pin (Included)
Controls Forward and Reverse Operation / Rubber Grip Handles
Easy Access Kill Switch On Handle
Tires Quantity: 2
Size: 4.8/4.00-8
Air Pressure: 60 PSI
Load Range: B
Maximum Load: 590 lb. Each
Maximum Speed 25 MPH
Hydraulic Oil Capacity 4 Gallons
Recommended Hydraulic Oil 10 Weight
Hitch Type 2” Ball Hitch with Safety Chain
Engine Type 9 HP Robin® / Unleaded Gasoline Powered / Pull Start
Automatic Low Oil Shut Down
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside
of the front cover. Keep this manual and invoice in a safe and dry place for future refer-
ence.
GENERAL SAFETY RULES AND PRECAUTIONS
WARNING! Read all instructions
Failure to follow all instructions listed below may result in re, and/or
serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit.1. Cluttered benches and dark areas
invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in
the presence of ammable liquids, gases, or dust. Power tools
create sparks which may ignite the dust or fumes.
Keep bystanders away while operating a power tool.3. Distractions can cause
you to lose control. Protect others in the work area from debris such as chips
and sparks. Provide barriers or shields as needed.
REV 09b
