A SERVICE OF

logo

SKU 94143 For technical questions, please call 1-800-444-3353 PAGE 7
Do not exceed 5. 25 MPH (or less when conditions warrant) when towing the Auger.
This machine is designed for off-road use only and is not DOT-approved for
highway or public road use.
Before towing, always examine the Auger for proper Tire air pressure (60 PSI)6.
Prior to towing the Auger, make sure to read and understand all instructions 7.
and safety precautions as outlined in the owner’s manual for the towing vehicle.
Make sure the towing vehicle is capable of towing the Auger. Make sure the hitch
on the towing vehicle is capable of towing the Auger. The towing capacity of the
hitch is typically stamped on the hitch drawbar.
Make sure the Hitch Coupler (22) and the vehicle’s ball hitch (not included) are 8.
of equal mating size (2”) and are rated equal to or greater than the weight of the
Auger.
Whenever possible, park the Auger on a at, level surface and chock both Tires 9.
(31) to keep the Auger from accidently moving.
Care must be taken when backing up the Auger. Only back up the Auger on a 10.
straight path. If the Auger is allowed to turn off the straight path while backing
up, the machine could jackknife, causing severe damage to the Auger and towing
vehicle.
MISCELLANEOUS PRECAUTIONS
People with pacemakers should consult their physician(s) before use. Electro-1.
magnetic elds in close proximity to heart pacemaker could cause pacemaker
interference or pacemaker failure. Caution is necessary when near engine’s
magneto or recoil starter.
The warnings and precautions discussed in this manual cannot cover all possible 2.
conditions and situations that may occur. It must be understood by the operator
that common sense and caution are factors which cannot be built into this prod-
uct, but must be supplied by the operator.
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on
page 20 are included. If any parts are missing or broken, please call Harbor Freight
Tools at the number shown on the cover of this manual as soon as possible.