SKU 94143 For technical questions, please call 1-800-444-3353 PAGE 17
With assistance, place the Hitch Coupler (22) over the vehicle’s Hitch Ball and 7.
push down on the Handle until the Trigger locks in the slot. Pull up and down
on the Coupler to make sure the Hitch Ball is tting snugly in the Coupler. There
should be no play between the Hitch Ball and Coupler. If there is play, tighten
the Adjustment Nut until no play is present. If the Adjustment Nut is too tight, the
Handle will not lock. (See Figure K.)
Reinstall the Safety Pin and “R” Pin. 8. (See Figure K.)
Make sure to attach each Towing Chain (26) equally to the towing vehicle’s rear 9.
bumper or frame. (See Figure K.)
10. CAUTION! Care must be taken when backing up the Auger. Only back up the
Auger on a straight path. If the Auger is allowed to turn off the straight path while
backing up, the Auger could jackknife, causing severe damage to the Auger and
towing vehicle.
When towing the Auger over long distances, stop and check the tightness of all 11.
connections frequently to ensure safe operation.
