For Auto Clean to function, the following criteria must be met:
– On 4U libraries with library firmware of .80 or lower that still contain a
Dedicated Cleaning Slot (DCS), or 4U libraries with library firmware higher
than 1.95 that chose to retain the DCS in their library, a CLN cartridge must
be present in that slot.
– On libraries that don’t have a DCS, a storage slot must be reserved (RSVD) by
reducing the active slot count by one.
– A cleaning cartridge (CLNxxxLx) must be placed or moved to the reserved
slot.
– Auto Clean must be enabled.
Note:
Cleaning cartridges must be replaced after 50 cleanings. The Web User
Interface inventory screen will show the number of cleaning sessions
remaining.
v I/O Station(s) enabled - The I/O Station(s) can be enabled (the default), or
disabled so the stations can be utilized as storage slots.
v Remove DCS No - If the DCS has been removed, it cannot be reinstated. This
option will no longer appear in the Operator Control Panel.
v Host Label Length - The Host Label Length is related to the Bar Code Labels
appearing on the media being used. The default value is 8, but 6 can also be
chosen.
Configure: Drive
Configure
Drive Interface
Control Path
Drive
a77ug042
SCSI IDSAS drives
do not
require user
configuration
A Speed
A Type
A Address
Mode
A Loop ID
Figure 5-14. Configure: Drive menu
5-22 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide
