Monitor Library: Drive Identity
This page provides the following detailed information about the drive. No changes
can be made from this page. The displayed information will vary depending on
the library model and drive type (SCSI, SAS, or Fibre Channel). Table 5-6 lists all
available elements on the Drive Identity page. An ″X″ indicates that the element
displays for the specified drive type.
Table 5-6. Drive Identity page elements
Menu Item Description 2U Library 4U Library
SCSI Fibre SAS SCSI Fibre SAS
Vendor ID This identifies the manufacturer of the tape drive. X X X X X X
Product ID This is the SCSI inquiry string of the tape drive. X X X X X X
Serial
Number
This is the unique identification number of the tape
drive that was assigned by the manufacturer.
X X X X X X
Firmware
Revision
This is the current level of firmware installed on the
drive. For information on updating your firmware, refer
to “Service Library: Upgrade Firmware” on page 5-54.
X X X X X X
SCSI ID This is the unique identifier assigned to the SCSI drive
to enable it to receive communications from the host
computer.
X X
Element
Address
This is the unique identifier assigned to the drive that
allows the host to recognize and communicate with the
drive.
X X X X X X
a77ug068
78A8156
Figure 5-24. The 2U library Monitor Library: Library Identity page
a77ug090
78A8157
Figure 5-25. The 4U library Monitor Library: Library Identity page
Chapter 5. Operations 5-31
