A SERVICE OF

logo

Rack Installation:
1. Remove the mounting brackets (1 in Figure 10-24) and anchors (2) from
each side of the defective library and install them on the replacement library
enclosure.
2. With assistance, slide the replacement library enclosure onto the metal rails that
are already in position in the rack (see Figure 10-25).
3. Tighten the mounting bracket screws (1 in Figure 10-12 on page 10-11) to
anchor the replacement library enclosure to the rack.
4. Proceed to “Completing the Installation of the Replacement Library Enclosure”
on page 10-25.
Desktop Installation:
1. Place the library in its permanent location.
2. Proceed to “Completing the Installation of the Replacement Library Enclosure”
on page 10-25.
a77ug188
1
2
Figure 10-24. Mounting brackets and anchors for securing the library in a rack (one bracket and anchor on each side
of the library)
a77ug196
Figure 10-25. Front view of a rack showing the rails installed
10-24 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide