A SERVICE OF

logo

5. Store the lock and label on the back panel of the replacement library enclosure
(see Figure 10-15).
6. Proceed to “Swapping Library Controller Cards” on page 10-15.
Note: Do not power on the replacement library enclosure without first
swapping the library controller cards. The library will not initialize with
the library controller card shipped with the replacement library
enclosure.
a77ug195
Figure 10-14. Removing the shipping label and lock from the top of the library and storing on the rear panel
1
2
a77ug019
Figure 10-15. Library shipping lock and label storage location on the real panel of the library
10-14 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide