A SERVICE OF

logo

Index
A
Access PIN, Operator Control
Panel 4-29
accessor 1-6
Accessor 1-5
accessory package 4-2
active slots 5-20, 5-38
Active Slots 4-18
air quality 4-1
air vents, front panel 1-1
Application Managed Encryption
(AME) 4-21
ASC C-1
ASCQ C-1
auto clean 5-20, 5-38
Auto Clean 4-18
B
Bar Code Labels 6-4
guidelines for using 6-5
bar code reader 1-6
bootcode firmware, current level 5-30
BOP 5-34
Border Gateway Protocol (BGP) 1-8
C
cable, host interface 4-12
Cartridge 1-11, 6-1
capacity scaling 6-1
cleaning 6-3
compatibility 6-2
data 6-1
proper handling 6-6
specifications 6-8
Write-Protect Switch 6-5
cartridge magazines 1-1, 1-5, 4-30
Cartridge, environment 6-7
cartridge, suspect 2-2
cartridges
inserting in library 4-33
populating library 4-33
Cartridges, insert and remove 5-55
channel calibration 1-10
choosing a location 4-1
clean drive 5-50
cleaning slot 5-57
clearance 4-1
Configure menu
network settings 4-15
configuring library using Web User
Interface 4-15
configuring the library 4-14
control keys 5-9
control path drive 5-31, 5-43
control path failover 3-2, 5-40
control paths 5-22
multiple 3-2
control paths (continued)
using
multiple for control path
failover 3-2
D
daisy-chaining 3-8
Data Cartridge 5-55
data transfer rate 1-8
DCS 5-57
dedicated cleaning slot A-2
default settings 5-24
description 1-1
desktop installation 4-1
Device drivers supported 1-13
DHCP 4-15, 4-24, 5-23, 5-44
Diagnostics 5-52
display contrast 5-29
dll 4-29, 7-12
Drive
channel
calibration 1-10
power management 1-11
speed matching 1-10
drive configuration 5-43
Drive Density 5-34
Drive Diagnostics 5-27, 5-52
drive dump, saving to host 5-52
drive firmware, current version 5-31
drive interface 5-22
Drive Log 5-51
drive serial number 5-31
drive sled
description 1-9
drive status 5-34
drive, clean 5-50
E
EKM 4-21
EKM Server Setting 4-21
element addresses 3-3, A-2, A-3
element addressing A-1
element types A-1
Encryption 1-6, 4-21
environment 1-13
operating 1-13
particulates 1-13
environmental specifications 1-11
Error Codes 8-1
Error LEDs 7-8
Error log 8-1
Ethernet Port 1-3
Export Media 4-33, 5-17, 5-49, 5-55, 9-1
F
factory default settings 5-24
fan vents 1-3
feature activation key 5-40
features
optional
drives
1-9
Fibre Channel 3-6
Fibre Channel interface
cables
and speeds 3-9
sharing on a SAN 3-9
zoning 3-9
Fibre Channel ports 3-8
Firmware
updating
using
ITDT Tool 9-5
firmware, upgrade 5-54
foot pads, installing 4-3
front panel components 1-1
G
Gateway address 4-15
Gateway Address 4-24, 5-23, 5-44
glossary H-1
H
Host Attachment 7-12
host bus adapter 3-6
host connection, verifying 4-29
host interface cable 4-12
host interface connectors 1-3
host interfaces 3-6
host preparation 4-29
humidity 4-1
I
I/O Station 1-1, 4-30, 5-55
I/O Station, configuring 5-57
I/O Station, open and close 5-57
identifying a suspect cartridge 1-1, 2-2
Import Media 4-33, 5-17, 5-49, 5-55
installation 4-1
Interface 7-12
interfaces 3-6
interfaces, supported 1-9
internal view of library 1-5
Internet Protocol version 4 1-8
Internet Protocol version 6 1-8
Inventory 5-15, 5-50
IP address 4-15, 5-30
IP Address 4-24, 5-23, 5-44
IP Stack 5-23
IPv4 1-8
IPv6 1-8
ITDT Tool 9-5
K
Key Path 5-34
Key Path Diagnostics 5-53
X-1