Fishnder 340C Owner’s Manual
InstAllIng the fIshfInder 340c > selectIng A locAtIon for the fIshfInder
InstallInG the fIshfInder 340c
To ensure the successful operation of your Fishnder 340C, you
must properly install the Fishnder and all of its related parts.
To install and use your Fishnder, you must do the
following:
1. SelectaproperlocationfortheFishnder.
2. MounttheFishnder.
3. Installyourtransducer.
4. Connect to your power source.
5. Test the installation.
Each of these steps is described in detail in the following sections.
Selecting a Location for the Fishnder
Consider the following when you select an installation location:
• Provides optimal viewing as you operate your vessel.
• Allows easy access to the unit’s keypad.
• Is strong enough to support the weight of the Fishnder and
protect it from excessive vibration or shock.
• Allows room for the routing and connection of the
power/
data and transducer cables. There should be at least a 3-inch
(8 cm) clearance behind the case.
DO NOT mount the unit in an area that is exposed to extreme
temperature conditions.
The temperature range for the Fishnder 340C is 5°F
to 131°F (-15°C to 55°C). Extended exposure to temperatures
exceeding this range (in storage or operating conditions) may
cause failure of the LCD screen. This type of failure and related
consequences are NOT covered by the manufacturer’s limited
warranty.
To get the best possible performance from your Fishnder 340C:
• Read the instructions rst, and then follow the instructions to
install the unit.
• Gather the appropriate fasteners and tools.
• Verify that all cables can reach the unit mounting location
and the transducer.
• Wear safety goggles and a dust mask when drilling, cutting,
or sanding.
