Garmin 340c Manual

A SERVICE OF

next previous

 Fishnder 340C Owner’s Manual

usIng the fIshfInder 340c > usIng the MAIn Menu

Using the Numbers Page

When you use the Numbers Page, you can view three data elds of

your choice. (See “Conguring Advanced Data Fields” on page 37

for more information about the data elds.)

To change the data elds on the Numbers Page:

1. FromtheNumbersPage,pressandholdDATA/CNFG. The

DataCongurationMenuappears.

2. Use the ROCKERtoselecttheeldthatyouwantto

change,andpressENTER. A menu of your option

categories appears.

3. Use the ROCKERtoselectthecategoryanddataeldthat

youwanttoappearonthescreeninthatposition,andpress

ENTER.

4. Makeallchanges.Whenyouarenished,pressQUIT.

Using the Main Menu

The Main Menu contains the Fishnder settings that should not

require frequent change. The Main Menu is divided into the

following tabs: Graph, Sonar, Temp, Alarms, System, Units, and

Time. Each tab is described in more detail in this section.

To view or change a setting in the Main Menu:

1. PressandholdADJ/MENU. The Main Menu appears.

2. Highlight the tab for the option you want to view or change.

3. Highlightthesettingyouwanttochange,andpressENTER.

The available settings appear.

4. Highlightthesettingyouwant,andthenpressENTER. The

new setting is now active.

Your changes to the Main Menu settings are used until you go to

the Main Menu and set the System Factory Settings option to .