Garmin 340c Manual

A SERVICE OF

next previous

40 Fishnder 340C Owner’s Manual

usIng the fIshfInder 340c > MArkIng A WAyPoInt

Marking a Waypoint

You can use Pointer mode to move a cursor around on the paused

Sonar Page to reference sonar items and mark waypoints for

that location (if your Fishnder is attached to a Garmin GPS or

compatible NMEA navigation device; see page 16). When you

use Pointer mode, a data eld appears at the top of the graph with

the cursor’s depth, surface temperature for that location, and GPS

coordinates (if available). This makes it easy to save the location of

an underwater object (such as a stump, rock, or brush pile), which

you can navigate back to with your GPS receiver.

To enable NMEA input/output:

1. PressandholdADJ/MENU. The Main Menu appears.

2. Use the ROCKER to select the System tab.

3. Use the ROCKER to select the NMEA Input/Outputeld.

Press ENTER.

4. Use the ROCKER to select On. Press ENTER. On appears

intheeld.

5. Press QUIT to return to the previous page.

To start or stop Pointer mode on a Sonar Page:

1. FromaSonarPage,holdPAUSEfortwoseconds.The

FishnderisnowinPointermode.

2. Use the ROCKERtomovethecursoraroundonthescreen.

Information about the Pointer location appears on the

screen.

3. Press QUIT to resume normal scrolling.