FOR YOUR SAFETY
WORKING ENVIRONMENT
When you lubricate or inspect the unit, unplug the power cord from
the control box.
Failure to do so may result in electric shock or injury.
Be sure to shut off the power supply before removing the power cord
from the control box.
When going inside the safety barrier, place a “Do Not Operate” sign on
the start switch.
During operation, always have the emergency stop switch within the
operator’s reach.
For the operator
’s safety, the emergency stop switch is necessary to make a
quick and safe stop.
Install a safety barrier of adequate strength so as to protect operators
from moving tools and flying objects.
lways use protective wear (helmet, gloves, glasses, and footwear) when
going inside the safety barrier.
Be sure to confirm that all the air tubes are connected correctly and
firmly.
Always watch out for robot's movement, even in the teaching mode.
Special attention will protect the operator from injury.
Warnings
Features II CARTESIAN Benchtop Robot
viii
