Control Panel Options 25
E-EQ-HX1RG-C-ARC HX1 Reference Guide
Date/Time
Access: Start | Settings | Control Panel | Date/Time Icon
Set Date, Time, Time Zone, and Daylight Savings.
Factory Default Settings
Current Time Midnight
Time Zone GMT-05:00
Daylight Savings Disabled
Figure 3-8 Date/Time Properties
There is little change from general desktop PC Date/Time Properties options. Adjust the settings
and click the OK box or the Apply button to save the changes. The changes take effect
immediately.
IMPORTANT: The HX1 does not automatically preserve time after a reboot or if the battery
pack goes dead.
• The SaveTime icon on the desktop can be to save the current time and apply this
time and date to the HX1 after reboot.
• It is necessary to use the SaveTime utility before each reboot or set the time and date
after each reboot to maintain the correct time and date for the HX1.
• The time and date must be set correctly when certificates are being used, such as for
EAP-TLS WPA authentication.
Dialing
Access: Start | Settings | Control Panel | Dialing Icon
The HX1 does not support a modem.
