Cisco Radio 63
E-EQ-HX1RG-C-ARC HX1 Reference Guide
Cisco Radio
If the HX1 contains a Cisco radio, the radio can be configured by clicking on the Cisco Radio
Configuration Utility or using the Microsoft Wireless Zero Config Utility. Please refer to the
chart below for supported security types, the utility used for that security type and the required
Cisco driver and firmware versions:
Security Type Utility Used Driver Version Firmware Version
None Cisco ACU Any Any
WEP Cisco ACU Any Any
LEAP Cisco ACU Any Any
LEAP (WPA ) Cisco ACU 2.60 or higher 5.60.17 or higher
PEAP Wireless Zero Config 2.60 or higher 5.60.17 or higher
EAP-TLS Wireless Zero Config 2.60 or higher 5.60.17 or higher
Wireless Configuration Utilities
Depending on the security type desired, it may be necessary to access one or both of the
configuration utilities.
Cisco Aironet Client Utility (ACU)
To start the Cisco Aironet Client Utility, click on the following desktop icon:
Note: If there is no Cisco icon on the desktop, please see “Cisco Icon Missing”, later in this
chapter for more information.
!
After any changes are made in the Cisco Configuration Utility, you must click on
the SaveCisco icon on the desktop.
