72 Cisco Radio
HX1 Reference Guide E-EQ-HX1RG-C-ARC
PEAP
Prerequisites
• Cisco driver must be 2.60 or higher, firmware must be 5.60.11 or higher.
• Use the WZC utility.
• The Cisco ACU profile must be set to <External Settings>.
• The date and time must be properly set on the HX1.
• The SSID of the wireless network.
• Network credentials (user name, password and domain).
• Certificate from CA server (see “Certificates” later in this chapter). PEAP uses a
Root CA certificate.
Make sure the date and time are correctly set on the HX1.
Import the Root CA certificate into the Trusted Authorities list. Please see “Certificates” later in
this chapter for information on generating, copying and importing the certificate.
To use PEAP, start the Wireless Zero Config utility if it has not already started.
Figure 4-34 Wireless Information Tab
Make sure the “Notify me when new network are available” checkbox is not checked.
Double click “Add New…” to bring up the Wireless Network Properties screen.
