70 Cisco Radio
HX1 Reference Guide E-EQ-HX1RG-C-ARC
LEAP
Note: This method does not use WPA encryption. Please see “LEAP (WPA)” (later in this
chapter) to use LEAP with WPA encryption.
Prerequisites
• Use the Cisco ACU utility.
• The WZC utility must be disabled.
• The SSID of the wireless network.
• User name and password, domain optional.
To use LEAP, create a new profile or select an exiting profile.
• Network Security Type must be set to LEAP.
• The following parameters are accessible when LEAP is selected. Please enter the
appropriate information.
o User Name
o User Password
o User Domain (optional)
If all entries are correct, the ACU Profiles tab shows “350 Series Radio is Associated”.
!
After any changes are made in the Cisco Configuration Utility, you must click on
the SaveCisco icon on the desktop. The HX1 should be rebooted after the
changes have been saved.
