A SERVICE OF

logo

Open as PDF
next previous
Summit Radio 57
E-EQ-HX1RG-C-ARC HX1 Reference Guide
PEAP/GTC
To use PEAP/GTC, make sure the following profile options are used.
• Enter the SSID of the Access Point assigned to this profile
• Set EAP Type to PEAP-GTC
• Set Encryption to WPA TKIP
• Set Auth Type to Open
Figure 5-18 PEAP/GTC
Click Credentials button.
Figure 5-19 PEAP/GTC Credentials
Enter the Domain\Username (if the Doman is required), otherwise enter the Username.
Enter the password.
Leave the CA Certificate File Name blank for now.
Click OK then click Commit. Ensure the correct Active Config is selected on the Main tab.
Once successfully authenticated, copy the CA certificate into the \System directory of the device.
Once the file is in the \System directory, enter the file name in the CA Certificate Filename text
box.