Chapter 25 Configuration: Spanning Tree
GS1900 Series User’s Guide
150
25.2.8 The Add/Modify MST Screen
Use this screen to configure the MST settings. Click Configuration > Spanning Tree > MST >
Add/Modify to open this screen.
Figure 132 Configuration > Spanning Tree > MST > Add/Modify
The following table describes the labels in this screen.
25.2.9 The MST Port Screen
Use this screen to view the MST Port settings. Click Configuration > Spanning Tree > MST
Port to open this screen.
VLAN Count Displays the VLAN count.
Priority Displays the priority for each port here.
Modify
Edit Click Edit to make changes to the entry.
Delete Click Delete to remove the entry.
Table 113 Configuration > Spanning Tree > MST (continued)
LABEL DESCRIPTION
Table 114 Configuration > Spanning Tree > MST > Add/Modify
LABEL DESCRIPTION
MST Instance
MST ID Displays the Multiple Spanning Tree Instance (MSTI) ID(s).
VLAN List Display a list of MSTI VLANs.
Priority Displays MSTI bridge ID priority value.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
