Chapter 27 Configuration: QoS
GS1900 Series User’s Guide
167
The following table describes the labels in this screen.
27.2.2 The Port Edit Screen
Use this screen to configure the Port Edit settings. Click Configuration > QoS > General > Port
> Edit to open this screen.
Figure 145 Configuration > QoS > General > Port > Edit
The following table describes the labels in this screen.
Table 126 Configuration > QoS > General
LABEL DESCRIPTION
QoS Port
Edit Select this check box to configure the properties of a port. Click the Edit button change the
properties of the port.
Port Displays the QoS port list.
CoS Value Displays the CoS value, range: 0 - 7.
Remark CoS Displays if this function is disabled or enabled.
Remark DSCP Displays if this function is disabled or enabled.
Remark IP
Precedence
Displays if this function is disabled or enabled.
Table 127 Configuration > QoS > General > Port > Edit
LABEL DESCRIPTION
QoS Port
Port List Displays the index number of the QoS port(s).
CoS Value Select the CoS Value from the dropdown list.
CoS Remark Select Enable to activate CoS Remark.
DSCP Remark Select Enable to activate DSCP Remark.
IP Precedence
Remark
Select Enable to activate IP Precedence Remark.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
