Chapter 28 Configuration: Security
GS1900 Series User’s Guide
181
Figure 160 Configuration > Security > 802.1X > Port > Edit
The following table describes the labels in this screen.
28.5 DoS
28.5.1 The Global Screen
Use this screen to view the Global settings. Click Configuration > Security > DoS > Global to
open this screen.
Table 142 Configuration > Security > 802.1X > Port > Edit
LABEL DESCRIPTION
802.1X Port Edit
Port List Displays the port index value.
Port State Displays the Trust status as enabled or disabled.
Reauthentication
State
Specify if a subscriber has to periodically re-enter his or her username and password to
stay connected to the port. Select Enable to activate feature.
Reauthentication
Period
Specify how often a client has to re-enter his or her username and password to stay
connected to the port.
Quiet Period Display the time out period to transmit request after receiving a rejection from the sever.
Supplicant Period Display the time out period to transmit a request when the client does not responsed.
Maximum
Request Retries
Enter the maximum number of request retries.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
